The DataHub Pro serial number is required to set up your PredictWind GPS tracking page and for AI polars to work.
Follow the steps below to check the DataHub Pro serial number.
Connect your computer or mobile device to the DataHub Pro Wi-Fi network. It will look like this in the list of available Wi-Fi networks on your device PW-Hub-XXXX
Open a Web browser tab (such as Chrome Or Safari) and enter 10.10.10.1 - this will open the PW-HUB, which is the control centre of the DataHub Pro.
Log in using admin as the username and admin as the password.
Go to the Tracking tab on the left-hand menu
The serial number will be displayed.
Ensure Enable Tracking is checked/ turned on.
If you have to tick to Enable Tracking, click SAVE & APPLY.
