The DataHub Pro includes a built-in 4G/LTE modem and a pre-installed PredictWind T-Mobile SIM card. You can replace it with your own compatible SIM card from a local cellular provider or a global roaming provider.
With a BYOD mobile data plan that allows internet sharing through an IoT device, the DataHub Pro can share this Internet connection with devices connected via DataHub Pro Wi-Fi or Ethernet LAN.
Before you start
You will need:
An activated SIM card with a 4G/LTE mobile data plan and available data allowance.
4G/LTE signal coverage from your chosen provider.
Your provider's APN (Access Point Name) for the specific SIM and plan.
The DataHub Pro and its connected LTE antenna.
The built-in modem supports 4G/LTE, not 5G cellular. Before purchasing a SIM, check that the provider uses LTE bands supported by the DataHub Pro.
Step 1: Replace the PredictWind SIM card
Disconnect power from the DataHub Pro before removing or inserting a SIM card.
Locate the SIM card tray/holder on your DataHub Pro and carefully remove the existing PredictWind T-Mobile SIM.
Insert your SIM card, ensuring it is correctly oriented and seated with the exposed side facing upward.
Do not force the tray or card.Ensure the LTE antenna is securely connected, positioned upright at approximately 45–90 degrees.
Reconnect power to the DataHub Pro.
Note: Keep the original PredictWind T-Mobile SIM card safe. It is linked to your DataHub Pro and should not be used in another device.
Step 2: Connect to the DataHub Pro
Connect a phone, tablet, or computer to the DataHub Pro Wi-Fi network e.g., PW-Hub-XXXX.
Open a browser such as Chrome or Safari and enter 10.10.10.1 in the address bar.
Log in to the DataHub Pro web interface using your admin credentials.
Step 3: Set the APN with the Wizard
An APN tells the LTE modem how to connect to your provider's mobile data network. It must match your SIM card and data plan requirements.
Open Services > Settings > LTE/SIM Card.
Under APN Settings, click the blue WIZARD button.
Select your SIM provider from the dropdown list, then click NEXT.
Continue through the Wizard as prompted. When it returns to APN Settings, check the displayed APN against the value supplied by your provider.
Click SET to save the APN and restart LTE networking.
In this example below you can see that the APN internet is used for 2degrees in New Zealand. This is not a universal APN. Your provider may require a different value e.g. web.
Note: If your SIM provider or plan is not listed, ask the provider for its APN and contact PredictWind Support for help applying settings not offered by the Wizard. Do not guess an APN from another provider.
Step 4: Allow the LTE modem to reconnect, then reboot the DataHub Pro
Clicking SET saves the APN and restarts LTE networking.
Allow approximately 30 seconds for the modem to re-register with the cellular network.
Select Services > Maintenance > REBOOT to restart the whole DataHub Pro.
Alternatively, disconnect power for about 10 seconds, reconnect it, and wait an additional 3–5 minutes.
Step 5: Confirm the SIM and Internet connection
Check LTE/SIM Card status
Open Services > Settings > LTE/SIM Card and scroll to Status.
Check that Status shows Connected.
Confirm that Carrier identifies your provider and Registration shows that the modem is registered.
Check Internet Status
Open Services > Settings > Internet Status.
Find the LTE USB Modem widget.
A working LTE Internet connection is shown in green with Status: Online.
Note: Connected on the LTE page confirms the modem session. Online on Internet Status is an additional check that the LTE Internet interface is operational.
Step 6: Test Internet access over the SIM
To verify that normal Internet traffic is using your SIM:
In Services > Settings > Internet Status check that the LTE USB Modem widget is shown in green with Status: Online.
Temporarily disconnect or disable other active Internet sources, such as Starlink, marina Wi-Fi or Ethernet WAN, so the DataHub Pro must use LTE.
Connect your phone or computer to DataHub Pro Wi-Fi and open a website. If testing on a phone, put the phone into flight mode and then reconnect to DataHub Pro Wi-Fi before testing.
Once the test is complete, reconnect your normal Internet sources and restore your phone settings.
Note: Disconnecting other WAN connections can temporarily interrupt onboard Internet-dependent services. Only do this when safe and convenient. Your SIM provider may charge for all traffic used during the test.
If your SIM still does not connect
Check that the SIM is activated, has a valid data allowance, supports 4G/LTE, is seated correctly and has no unresolved SIM PIN requirement.
Confirm the antenna, coverage, APN and provider compatibility.
Then use the detailed troubleshooting guide:
Frequently asked Questions
What kind of 4G / LTE modem does the DataHub Pro have?
Ask your provider whether their network supports the DataHub Pro modem, a Quectel EG25-GL Category 4 (Cat 4) LTE modem.
DataHub Pro modem specifications
Specification | Details |
Manufacturer | Quectel |
Model | EG25-GL |
Cellular generation | 4G/LTE, not 5G |
LTE category | Cat 4 |
Maximum download | 150 Mbps |
Maximum upload | 50 Mbps |
LTE technologies | FDD-LTE and TDD-LTE |
Legacy network support | UMTS/HSPA+, GSM/GPRS/EDGE |
SIM Type | Nano SIM (not e-SIM) |
Network | Bands |
LTE-FDD | B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28, (B66) |
LTE-TDD | B34, B38, B39, B40, B41 |
What internet speed can I expect with a 3rd-party SIM?
The DataHub Pro can achieve theoretical maximum speeds of up to 150 Mbps download and 50 Mbps upload under ideal network conditions. Actual Internet speeds are typically lower and can vary considerably depending on the cellular network, available coverage, signal quality, connected cell tower, and LTE frequency band.
The modem supports MIMO technology to improve reception and data performance but does not support carrier aggregation, which lets compatible devices combine multiple LTE frequency bands for higher speeds.
Many modern smartphones support more advanced 4G/LTE technologies, including carrier aggregation and additional MIMO antenna configurations, as well as 5G. This means your phone may achieve significantly higher Internet speeds than the DataHub Pro, even when using the same SIM card and cellular provider in the same location.
The DataHub Pro automatically connects to an available cellular tower and LTE frequency band based on network conditions. The band it connects to may not always provide the fastest available Internet connection.
Cellular performance can also change throughout the day as network congestion, signal conditions and the number of other users connected to a tower vary. Moving to another location may cause the modem to connect to a different tower or frequency band, with different speeds.
For these reasons, there is no guaranteed Internet speed when using a third-party SIM in the DataHub Pro, and a speed test performed on a modern smartphone is not necessarily representative of the speeds the DataHub Pro will achieve.
Important information
Mobile data charges: Your SIM provider charges for data according to your plan. Connected devices may use data in the background for software updates, cloud services and other applications.
Cellular coverage: The built-in modem needs a compatible cellular network and is not an offshore satellite Internet connection.
Original PredictWind SIM: The supplied T-Mobile SIM is linked to your DataHub Pro. Do not use it in another device.




