Please follow the steps below to enable a Wi-Fi password and encryption to your DataHub Pro:
Login to the DataHub Pro (10.10.10.1) using the admin account.
Click on WiFi in the top menu bar.
Click on the DataHub Pro WiFi (5ghz) button.
Click on the Encryption drop-down box.
Select WPA3-PSK. This is the recommended and strongest encryption supported.
Type in a password of at least eight characters long, including upper and lower case letters, numbers and symbols, e.g. @ # or !.
Click Update.
Important Note: You will be disconnected from DataHub Pro Wi-Fi.
Please allow 2-3 minutes for the new settings to take effect. If you are connected to the DataHub Pro over Wi-Fi, you must manually reconnect to the network when it becomes available again to continue using the DataHub Pro.
If you are presented with the below message, please click Join.
